temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 1 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 silicon npn phototransistor, rohs compliant description temt1000 series are silicon npn phototransistors with high radiant sensitivity in black, surface mount, plastic packages with lens and daylight blocki ng filter. filter bandwidth is matched with 870 nm to 950 nm ir emitters. features ? package type: surface mount ? package form: gw, rgw, yoke, axial ? dimensions (l x w x h in mm): 2.5 x 2 x 2.7 ? high radiant sensitivity ? daylight blocking filter matched with 870 nm to 950 nm ir emitters ? fast response times ? angle of half sensitivity: ? = 15 ? package matches with ir emitter series tsml1000 ? floor life: 168 h, msl 3, acc. j-std-020 ? compliant to rohs directive 2002/95/ec and in accordance with weee 2002/96/ec applications ? detector in electronic control and drive circuits ? ir detector for daylight application ? photo interrupters ?counter ?encoder note ? test conditions see table basic characteristics note ? moq: minimum order quantity 16757 temt1000 temt1030 temt1040 temt1020 product summary component i ca (ma) ? (deg) ? 0.5 (nm) temt1000 7 15 730 to 1000 temt1020 7 15 730 to 1000 temt1030 7 15 730 to 1000 temt1040 7 15 730 to 1000 ordering information ordering code packaging remarks package form temt1000 tape and reel moq: 1000 pcs, 1000 pcs/reel re verse gullwing temt1020 tape and reel moq: 1000 pcs, 1000 pcs/reel gullwing temt1030 tape and reel moq: 1000 pcs, 1000 pcs/reel yoke temt1040 bulk moq: 1000 pcs, 1000 pcs/bulk axial leads absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit emitter collector voltage v eco 5v collector current i c 50 ma collector peak current t p /t = 0.5, t p ? 10 ms i cm 100 ma power dissipation t amb ? 55 c p v 100 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 85 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s t sd 260 c thermal resistance junction/ambient soldered on pcb with pad dimensions: 4 mm x 4 mm r thja 400 k/w
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 2 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - power dissipation limit vs. ambient temperature basic characteristics (t amb = 25 c, unless otherwise specified) fig. 2 - collector dark current vs. ambient temperature fi g. 3 - relative collector cu rrent vs. ambient temperature 0 20 40 60 80 100 120 0 10 203040 50607080 90100 t amb - ambient temperature (c) 21167 r thja = 400 k/w p v - power dissipation (mw) basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit collector emitter voltage i c = 1 ma v ceo 70 v collector emitter dark current v ce = 20 v, e = 0 i ceo 1 200 na collector emitter capacitance v ce = 5 v, f = 1 mhz, e = 0 c ceo 3pf angle of half sensitivity ? 15 deg wavelength of peak sensitivity ? p 880 nm range of spectral bandwidth ? 0.5 730 to 1000 nm collector emitter sa turation voltage e e = 1 mw/cm 2 , ? = 950 nm, i c = 0.1 ma v cesat 0.3 v turn-on time v s = 5 v, i c = 5 ma, r l = 100 ? t on 2.0 s turn-off time v s = 5 v, i c = 5 ma, r l = 100 ? t off 2.3 s cut-off frequency v s = 5 v, i c = 5 ma, r l = 100 ? f c 180 khz collector light current e e = 1 mw/cm 2 , ? = 950 nm, v ce = 5 v i ca 27.0 ma 20 100 40 60 80 10 10 1 10 2 10 3 10 4 v ce = 20 v t amb - ambient temperature (c) i ceo - collector dark current (na) 94 8304 0 0.6 0.8 1.0 1.2 1.4 2.0 20 40 60 80 100 1.6 1.8 94 8239 t amb - ambient temperature (c) i ca rel - relative collector current v ce = 5 v e e = 1 mw/cm 2 = 950 nm
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 3 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 4 - collector ligh t current vs. irradiance fig. 5 - collector em itter capacitance vs. collector emitter voltage fig. 6 - turn-on/turn-off time vs. collector current fig. 7 - relative spectral sensitivity vs. wavelength fig. 8 - relative radiant sensitivity vs. angular displacement 0.01 0.1 1 0.01 0.1 1 10 100 i ca - collector light current (ma) e e - irradiance (mw/cm2) 10 21168 v ce = 5 v = 950 nm 0.1 10 1 0 2 4 6 8 10 100 f = 1 mhz c ceo - collector emitter capacitance (pf) v ce - collector emitter voltage (v) 94 8294 0 0 2 4 6 8 10 12 14 2 8 6 4 v ce = 5 v r l = 100 = 950 nm t off t on i c - collector current (ma) t on /t off - turn-on/turn-off time (s) 94 8293 21169 0.0 0.1 0.2 0.3 0.4 0.5 600 700 800 900 1000 1100 - wavelength (nm) s( ) rel - relative spectral sensitivity 0.6 0.7 0.8 0.9 1.0 s rel - relative sensitivity 94 8248 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 0 0.2 0.4 ? - angular displacement
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 4 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 precautions for use 1. over-current-proof customer must apply resistor s for protection, otherwise slight voltage shift will cause big current change (burn out will happen). 2. storage ? storage temperature and rel. humi dity conditions are: 5 c to 35 c, r.h. 60 %. ? floor life must not exceed 168 h, acc. to jedec level 3, j-std-020. once the package is opened, the products should be used within a week. otherwise, they should be kept in a damp proof box with desiccant. considering tape life, we suggest to use products within one year from production date. ? if opened more than one week in an atmosphere 5 c to 35 c, r.h. 60 %, devices should be treated at 60 c 5 c for 15 h. ? if humidity indicator in the package shows pink color (normal blue), then devices should be treated with the same conditions as 2.3. reflow solder profile fig. 9 - lead tin (snpb) reflow solder profile fig. 10 - lead (pb)-free reflow solder profile acc. j-std-020 package dimensions in millimeters: temt1000 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 time (s) temperature (c) 17172 + 5 c/s 5 s 60 s to 120 s - 5 c/s 22566 120 s max. 60 s max. above 220 c 260 c max. 10 s max. pre-heating 180 c to 200 c 1 c/s to 5 c/s 1 c/s to 5 c/s 16104 3.05 0.2 ? 1.9 0.2 1.5 1.4 2.7 0.2 5.8 0.2 1.1 2 0.2 0.5 0.4 ce 6.3 0.1 3.7 0.1 1 0.1 4.3 0.2 0.15 0.05 2.5 0.2
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 5 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: temt1020 package dimensions in millimeters: temt1030 16105 16756
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 6 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: temt1040 reel dimensions in millimeters 16500 issue: 3; 11.06.08 drawing-no.: 9.800-5080.01-4 leader and trailer tape: parts mounted empty trailer (200 mm, min.) empty leader (400 mm, min.) direction of pulling out unreel direction 60.2 0.5 178 1 2 . 5 0.5 label posted here coming out from reel tape position x x 13 0.5 13.2 1.5 16 0.2 18033
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 7 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions in millimeters: temt1000 taping dimensions in millimeters: temt1020 18089 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction collector 18090 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction collector
temt1000, temt1020, temt1030, temt1040 www.vishay.com vishay semiconductors rev. 1.6, 29-jun-11 8 document number: 81554 for technical questions, contact: detectortechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions in millimeters: temt1030 18091 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction collector
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
